Atamate is now an official Autodesk Tandem partner

Atamate is now an official Autodesk Tandem partner

Atamate is now an official partner of Autodesk Tandem. Our Building Operating System, atBOS, feeds real-time sensor and metering data into Tandem, turning static digital twins into live models that show how buildings actually perform.

The hidden winter cost of electric heating

The hidden winter cost of electric heating

Commercial electricity bills charge for peak demand as well as usage, and electric heating pushes that peak up just when the grid is most expensive. Here’s why switching from gas can drive bills up, and how smart load management keeps costs in check.

The performance gap: why building models get it wrong

The performance gap: why building models get it wrong

Buildings routinely use 2 to 3 times more energy than SAP and SBEM models predict. Here’s why the performance gap exists, how Europe’s revised EPBD is shifting the focus to real-world performance, and what high-quality building data reveals.

UK building regulations as a roadmap to better performance

UK building regulations as a roadmap to better performance

MID, DEC, SECR, ESOS, EPC, MEES: UK building regulations can feel like alphabet soup. Here’s how the smartest building owners use them as a roadmap to better performance, plus a cheat sheet of what each one requires.

9 heating systems and when to use each one

9 heating systems and when to use each one

Swapping gas boilers for electric heating means choosing between 9 common systems, from heat pumps to infrared panels. Here’s what each one does best, and why understanding how a building is used matters as much as how well it’s insulated.

Why your BMS data is locked away

Why your BMS data is locked away

Most building management systems collect valuable performance data, then keep it on site where nobody can use it. Here’s why secure remote access is key to getting that data to the people who can actually improve your building’s performance.

A modern BMS without the price tag

A modern BMS without the price tag

Traditional BMS is costly, complex to install and hard to operate. Here’s how atBOS gives building owners and specifiers a modern BMS that’s simple to install, easy to run and affordable across an entire estate.

The lasting impact of the Alchemai project

The lasting impact of the Alchemai project

After 18 months, the Innovate UK-funded Alchemai project has concluded. In the final part of our series, we look at what the data revealed, the real-world challenges of decarbonisation, and what comes next, including the launch of spin-out company Inform.

What we learned from 3 months of building data

What we learned from 3 months of building data

Three months into the Alchemai project, the data is in. From a museum where lighting and sockets use 80% of the electricity to spaces occupied less than 1% of the time, here’s what we found across our four pillars, and the hurdles we hit along the way.

The 4 pillars of smarter decarbonisation

The 4 pillars of smarter decarbonisation

In part 2 of our Alchemai series, we explore the four pillars of building intelligence: occupancy, thermal comfort, air quality and energy use. Here’s what each one reveals about how buildings really perform, and how that data shapes smarter decarbonisation.

Introducing Alchemai: data-driven building decarbonisation

Introducing Alchemai: data-driven building decarbonisation

Alchemai is an 18-month, £2.5m Innovate UK project using building data to recommend the best routes to decarbonisation. In part 1, we introduce the project, the partners involved and the role atBOS plays in gathering the data.

Construction sites are guilty of massive carbon emissions

Construction sites are guilty of massive carbon emissions

Many construction sites rely on diesel generators to power site cabins. Here’s how atBOS is helping Algeco cut cabin energy use by over 25%, reduce peak loads and right-size batteries and generators.

Why traditional Building Management Systems (BMS) don’t work and what to do instead…

Why traditional Building Management Systems (BMS) don’t work and what to do instead…

Traditional building management systems sit in the plant room and can’t see what’s happening room by room. Here’s why that wastes energy, and how atBOS adds wireless, room-level monitoring and control without replacing your existing BMS.